As most of you know, I’m a huge fan of the Microsoft Surface Pro tablet. I’ve been using it since day 1 of the release and absolutely love it. This thing has become such a valuable tool in my life, if anything were to happen to it, I’d replace it in a flash.
Since I’ve had mine, I’ve had numerous clients ask about it. After demo’ing the device, most have actually gone out and pulled the trigger. They all compare it to their various old tablets, and say hands down the Surface Pro is #1.
Recently one of my clients was thinking of purchasing a Surface so he didn’t have to lunk around his high performance laptop. One of the most important questions he had were the spec’s of the device and if it could handle the seismic software applications he and his business use. Since the Surface Pro is essentially a higher performing computer in the form factor of a tablet, I said chances are it would work. He went out and bought one.
For the most part, most applications worked right off the bat. However we had a few issues with Omni 3D from Gedco. The application would install fine, however we were receiving errors when launching the application:
The application was unable to start correctly (0xc0150002). Click OK to close the application.
We tried contacting Omni 3D support, however they mentioned running Omni 3D on Windows 8 or later was unsupported and untested, especially running it on a Tablet. They mentioned they’ve never recalled getting Omni 3D to run on a tablet. Well, we wanted to make history! 🙂
Trying different compatibility configurations had no affect. Ultimately, I researched the error and noticed it had something to do with C++ runtime’s. Although none of the posts had a solution to our problem, it at least pointed us in the right direction. I noticed we already had the 64-bit and 32-bit C++ 2010 runtime’s installed (I believe a different application installed these), so first and foremost, I re-installed these. It had no affect. I then decided to try installing the C++ 2008 run time installs. In our case, we installed the 64-bit version of Omni 3D, so I installed the 64-bit version of the Microsoft Visual C++ 2008 Runtime components available here.
After installing this, we went to open up Omni 3D and it worked!
Keep in mind that this should not only work and apply to Surface Pro tablets, but to anyone trying to install Omni 3D on Windows 8 or Windows 10.
While most of us frequently deploy new ESXi hosts, a question and task not oftenly discussed is how to properly decommission a VMware ESXi host. Some might be surprised to… Read More
This guide will outline the instructions to Disable the VMware Horizon Session Bar. These instructions can be used to disable the Horizon Session Bar (also known as the Horizon Client… Read More
Normally, any VMs that are NVIDIA vGPU enabled have to be manually migrated with manual vMotion if a host is placed in to maintenance mode, to evacuate the host. While… Read More
You may experience GPU issues with the VMware Horizon Indirect Display Driver in your environment when using 3rd party applications which incorrectly utilize the incorrect display adapter. This results with… Read More
Today we're going to cover a powerful little NAS being used with VMware; the Synology DS923+ VMware vSphere Use case and Configuration. This little (but powerful) NAS is perfect for… Read More
Today we'll go over how to install the vSphere vCenter Root Certificate on your client system. Certificates are designed to verify the identity of the systems, software, and/or resources we… Read More