Earlier this month, we decided to hike and climb Grotto Mountain. Grotto Mountain is just outside of Canmore, Alberta, with it’s trail head starting right by the Alpine club. This was my 3rd time doing the hike, and 1st for my friend. This was however the first time I’ve done the complete loop, ascending the ACC route, and descending the hard route.
While we completed the loop in a clockwise manner, I highly recommend against this. From the summit down, it was extremely difficult to find the trail, even with a downloaded map and GPS. Not only will you get lost, but it’s also incredibly difficult (probably one of the most difficult descents I’ve done simply because I kept slipping).
I’d highly recommend doing the loop in a counter-clockwise method. While this trail is “safe”, it is difficult and challenging requiring lots of stamina and cardio work. Things can get a little risky on the hard route.
AllTrails Link: https://www.alltrails.com/trail/canada/alberta/grotto-mountain-trail
My AllTrails Recording: https://www.alltrails.com/explore/recording/recording-aug-04-06-07-pm–3
Grotto Mountain is an ascent up to an altitude of around 2,870m (9416ft), with beautiful views of Canmore, Alberta and other mountains. I completed this trek with my usual hiking buddy Elisha!
And of course, below is a picture of the mountain from Canmore, Alberta. The summit is actually the peak/summit on the right side of the mountain, the left is the lower fake summit.
As I mentioned above, it’s very challenging even having done it a few times before. The ACC route is a nice long slow climb and descent, while the hard route is pretty much straight up and down.
Along the hard route we did see some wild life like mountain goats, but they stayed far away. I’ve never seen bears on this hike, however I believe there may be a risk at the bottom, as well as up to the point of the top of the tree line.
Stay safe, be bear aware, and always make sure you always do hikes like this with a friend!
While most of us frequently deploy new ESXi hosts, a question and task not oftenly discussed is how to properly decommission a VMware ESXi host. Some might be surprised to… Read More
This guide will outline the instructions to Disable the VMware Horizon Session Bar. These instructions can be used to disable the Horizon Session Bar (also known as the Horizon Client… Read More
Normally, any VMs that are NVIDIA vGPU enabled have to be manually migrated with manual vMotion if a host is placed in to maintenance mode, to evacuate the host. While… Read More
You may experience GPU issues with the VMware Horizon Indirect Display Driver in your environment when using 3rd party applications which incorrectly utilize the incorrect display adapter. This results with… Read More
Today we're going to cover a powerful little NAS being used with VMware; the Synology DS923+ VMware vSphere Use case and Configuration. This little (but powerful) NAS is perfect for… Read More
Today we'll go over how to install the vSphere vCenter Root Certificate on your client system. Certificates are designed to verify the identity of the systems, software, and/or resources we… Read More