Let’s say you manage numerous 10ZiG Zero clients and your users all have similar USB hardware that needs to be redirected to the VDI session. In most cases the hardware will be redirected without any configuration necesary, but what about when that doesn’t happen. You need to push a configuration template with the device information to your 10ZiG Zero Clients.
In my case, I use a YubiKey Security Key. I regularly use this for logins in Chrome and noticed that it wasn’t being directed via USB redirection.
If you’re interesting in 10ZiG products and looking to buy, don’t hesitate to reach out to me for information and/or a quote! We can configure and sell 10ZiG Zero Clients (and thin clients), help with solution design and deployment, and provide consulting services! We sell and ship to Canada and the USA!
This post is part two of a three part 10ZiG Manager Tutorial series:
In this post we’re going to cover the later, and show you how to add this to a config template. In my example, we’ll be adding the YubiKey security key with a hardware identifier (USB Product ID/PID) of 1050/0120 (Vendor ID: 1050, Product ID: 0120). We’ll be manually adding the hardware ID/PID to the config template in this tutorial.
Please Note: You can also add the settings on a 10ZiG Zero Client, and generate a template by pulling the config from that client. You can then push this to others as well.
To find out the Hardware ID/PID, you can either use the “Device Manager” on Windows, or plug in the device in to a 10ZiG Zero Client, go to settings, USB Redirection, and you should see the device name, along with the HID/PID info.
You’re done! You can now deploy this template to a single 10ZiG Zero Client, or deploy it as a batch to many 10ZiG Zero Clients.
While most of us frequently deploy new ESXi hosts, a question and task not oftenly discussed is how to properly decommission a VMware ESXi host. Some might be surprised to… Read More
This guide will outline the instructions to Disable the VMware Horizon Session Bar. These instructions can be used to disable the Horizon Session Bar (also known as the Horizon Client… Read More
Normally, any VMs that are NVIDIA vGPU enabled have to be manually migrated with manual vMotion if a host is placed in to maintenance mode, to evacuate the host. While… Read More
You may experience GPU issues with the VMware Horizon Indirect Display Driver in your environment when using 3rd party applications which incorrectly utilize the incorrect display adapter. This results with… Read More
Today we're going to cover a powerful little NAS being used with VMware; the Synology DS923+ VMware vSphere Use case and Configuration. This little (but powerful) NAS is perfect for… Read More
Today we'll go over how to install the vSphere vCenter Root Certificate on your client system. Certificates are designed to verify the identity of the systems, software, and/or resources we… Read More
View Comments