Oct 192017
 

In the past few days, I’ve noticed that some Sophos UTM firewalls I manage for clients haven’t been sending their daily reports (or other notification e-mails). When I first noticed this, checking my own SMTP proxy, I noticed that the e-mails were being sent from the firewalls, but were being dropped due to an SPF check failure.

Originally I thought this may have just been an overnight glitch with the DNS providers, however I later noticed that it’s stopped all e-mails coming from all the UTMs.

Further investigation, I realized that by default, the Sophos UTMs send their firewall notifications (and configuration backups) from the domain “fw-notify.net”, specifically, the e-mail address “[email protected]”. That’s when I had a brainfart and realized the e-mails weren’t being sent from my clients owned domains, but this fw-notify.net domain.

It appears that recently some SPF records have been created for the domain “fw-notify.net”, which is what is causing this issue. Also, I’m not quite sure if the domain underwent ownership change, or it his was overlooked by someone at Sophos.

I’m assuming numerous other longtime UTM users will be experiencing this as well.

To fix this, just log in to the problem UTMs, and change the notification Sender address as shown below to a domain you own. I changed mine to [email protected] (which has valid SPF since it’s my domains relay).

Feb 062017
 

Had a nasty little surprise with one of my clients this afternoon. Two days ago I updated their Sophos UTM (UTM220) to version 9.410-6 without any issues.

However, today I started to receive notifications that services were crashing (specifically ACC device agent).

After receiving a few of these, I logged in to check it out. Immediately there was no visible errors on the UTM itself, but after some further digging, I noticed these event logs in the “System Messages” log file:

2017:02:06-17:09:32 mail partitioncleaner[7918]: automatic cleaning for partition /tmp started (inodes: 0/100 blocks: 100/85)

2017:02:06-17:09:32 mail partitioncleaner[7918]: stopping deletion: can’t delete more files

Looks like a potential storage problem? Yes it was, but slightly more complicated.

I enabled SSH on the UTM and issued the “df” command (show’s volume usage), and found that the /tmp volume was 100% full.

Doing a “ls” and “ls -hl”, I found there were 25+ files that were around 235MB in size called: “AV-malware-names-XXXX-XXXXXX”.

Restarting the unit clears those files, however they come back shortly (I noticed it would add one every 5-10 minutes).

After some further digging (still haven’t heard back from Sophos on the support case), I came across some other users experiencing the same issues. While no one found a permanent resolution, they did mention this had to do with the Avira AV engine or possibly the dual scan engine.

Checking the UTM, I noticed that we had the E-Mail scanning configured for dual scan.

Solution (temporary workaround):

I went ahead and configured the E-Mail scanner (the only scanner I had that was using dual scan) to use single scan only. I then restarted the UTM. In my environment the default setting for single scanning is set to “Sophos”.

I am now sitting here with 30 minutes of uptime and absolutely no “AV-malware-names-XXXX-XXXXXX” files created.

I will post an update when I hear back from Sophos support.

Hope this helps someone else!

 

Update (after original post):

I heard back from Sophos support, this is a known bug in 9.410. The current official workaround is to change to single scan and use the AVIRA engine instead of the Sophos engine.

Update #2:

Received notification this morning of a new firmware update available (Version: 9.411003 – Maintenance Release). While I haven’t installed it, it appears from the Bugfixes notes that it was released to fix this issue:

 Fix [NUTM-6804]: [AWS] Update breaks HVM standalone installations
Fix [NUTM-6747]: [Email] SAVI scanner coredumps permanently in MailProxy after update to 9.410
Fix [NUTM-6802]: [Web] New coredumps from httpproxy after update to v9.410

Update #3:

I noticed that this bug was interrupting some mailflow on my Sophos UTM, as well as some of my clients. I went ahead and as an emergency situation, installed 9.411-3.

Things were fine for around 10 hours until I started to receive notification of the HTTP proxy failing and requiring restart. Logging in to the UTM, it was very unresponsive, sometimes completely unresponsive for around 10 minutes. Web browsing was not functioning at all on the internal network behind the UTM.

This issue still hasn’t been resolved. Hopefully we see a stable working fix sometime soon.

May 312013
 

Back in February, I was approached by a company that had multiple offices. They wanted my company to come in and implement a system that allowed them to share information, share files, communicate, use their line of business applications, and be easily manageable.

Just an FYI, I provide Microsoft Small Business Server consulting services, including migrations! For more information, please visit https://www.stephenwagner.com/2020/02/28/microsoft-small-business-server-migration-upgrade/.

The Solution – Microsoft Small Business Server 2011

The first thing that always comes to mind is Microsoft Small Business Server 2011. However, what made this environment interesting is that they had two branch offices in addition to their headquarters all in different cities. One of their branch offices had 8+ users working out of it, and one only had a couple, with their main headquarters having 5+ users.

Usually when administrators think of SBS, they think of a single server (two server with the premium add-on) solution that provides a small business with up to 75 users with a stable, enterprise feature packed, IT infrastructure.

SBS 2011 Includes:

  • Windows Server 2008 R2 Standard
  • Exchange Server 2010
  • Microsoft SharePoint Foundation 2010
  • Microsoft SQL Server 2008 R2 Express
  • Windows Server Update Services
  • (And an additional Server 2008 R2 license with Microsoft SQL Server 2008 R2 Standard if the premium add-on is purchased)

Essentially this is all a small business typically needs, even if they have powerful line of business applications.

Additional Domain Controller on SBS

One misconception about Windows Small Business Server is the limitation of having a single domain controller. IT professionals often think that you cannot have any more domain controllers in an SBS environment. This actually isn’t true. SBS does allow multiple domain controllers, as long as there is a single forest, and not multiple domains. You can have a backup domain controller, and you can have multiple RODCs (Read Only Domain Controller), as long as the primary Active Directory roles stay with the SBS primary domain controller. You can have as many global catalogs as you’d like! As long as you pay for the proper licenses of all the additional servers 🙂

This is where this came in handy. While I’ve known about this for some time, this was the first time I was attempting at putting something like this in to production.

The Plan

The plan was to setup SBS 2011 Premium at the HQ along with a second server at the HQ hosting their SQL, line of business applications, and Remote desktop Services (formerly Terminal Services) applications. Their HQ would be sitting behind an Astaro Security Gateway 220 (Sophos UTM).

The SBS 2011 Premium (2 Servers) setup at the HQ office will provide:

  • Active Directory services
  • DHCP and DNS Services
  • Printing and file services (to the HQ and all branch offices)
  • Microsoft Exchange
  • “My Document” and “Desktop” redirection for client computers/users
  • SQL DB services for LoB’s
  • Remote Desktop Services (Terminal Services) to push applications out in to the field

The first branch office, will have a Windows Server 2008 R2 server, promoted to a Read Only Domain Controller (RODC), sitting behind an Astaro Security Gateway 110. The Astaro Security Gateway’s would establish a site-to-site branch VPN between the two offices and route the appropriate subnets. At the first branch office, there is issues with connectivity (they’re in the middle of nowhere), so they will have two internet connections with two separate ISPs (1 line of sight long range wireless backhaul, and one simple ADSL connection) which the ASG 110 will provide load balancing and fault tolerance.

The RODC at the first branch office will provide:

  • Active Directory services for (cached) user logon and authentication
  • Printing and file services (for both HQ and branch offices)
  • DHCP and DNS services
  • “My Documents” and “Desktop” redirection for client computers/users.
  • WSUS replica server (replicates approvals and updates from WSUS on the SBS server at the main office).
  • Exchange access (via the VPN connection)

Users at the first branch office will be accessing file shares located both on their local RODC, along with file shares located on the HQ server in Calgary. The main wireless backhaul has more then enough bandwidth to support SMB (Samba) shares over the VPN connection. After testing, it turns out the backup ADSL connection also handles this fairly well for the types of files they will be accessing.

The second branch office, will have an Astaro RED device (Remote Ethernet Device). The Astaro/Sophos RED devices, act as a remote ethernet port for your Astaro Security Gateways. Once configured, it’s as if the ASG at the HQ has an ethernet cable running to the branch office. It’s similar to a VPN, however (I could be wrong) I think it uses EoIP (Ethernet over IP). The second branch doesn’t require a domain controller due to the small number of users. As far as this branch office goes, this is the last we’ll talk about it as there’s no special configuration required for these guys.

The second branch office will have the following services:

  • DHCP (via the ASG 220 in Calgary)
  • DNS (via the main HQ SBS server)
  • File and print services (via the HQ SBS server and other branch server)
  • “My Document” and “Desktop” redirection (over the WAN via the HQ SBS server)
  • Exchange access (via the Astaro RED device)

Hardware

For all the servers, we chose HP hardware as always! The main SBS server, along with the RODC were brand new HP Proliant ML350p Gen8s. The second server at the HQ (running the premium add-on) is a re-purposed HP ML110 G7. I always configure iLo on all servers (especially remote servers) just so I can troubleshoot issues in the event of an emergency if the OS is down.

Implemenation

I’ll explain how this was all implemented.

  1. Configure and setup a typical SBS 2011 environment. I’m going to assume you already know how to do this. You’ll need to install the OS. Run through the SBS configuration wizards, enable all the proper firewall rules, configure users, install applicable server applications, etc…
  2. Configure the premium add-on. Install the Remote Desktop Services role (please note that you’ll need to purchase RDS CAL’s as they aren’t included with SBS). You can skip this step if you don’t plan on using RDS or the premium server at the main site.
  3. Configure all the Astaro devices. Configure a Router to Router VPN connection. Create the applicable firewall rules to allow traffic. You probably know this, but make sure both networks have their own subnet and are routing the separate subnets properly.
  4. Install Windows Server 2008 R2 on to the target RODC box (please note, in my case, I had to purchase an additional Server 2008 license since I was already using the premium add-on at the HQ site. (If you purchase the premium add-on, but aren’t using it at your main office, you can use this license at the remote site).
  5. Make sure the VPN is working and the servers can communicate with each other.
  6. Promote the target RODC to a read only domain controller. You can launch the famous dcpromo. Make sure you check the “Read Only domain controller” option when  you promote the server.
  7. You now have a working environment.
  8. Join computers using the SBS connect wizard. (DO NOT LOG ON AS THE REMOTE USERS UNTIL YOU READ THIS ENTIRE DOCUMENT)

I did all the above steps at my office and configured the servers before deploying them at the client site.

You essentially have a working basic network. Now to get to the tricky stuff! This tricky stuff is to enable folder redirection at the branch site to their own server (instead of the SBS server), and get them their own WSUS replica server.

Now to the fancy stuff!

1. Installing WSUS on the RODC using the add role feature in Windows Server: You have to remember that RODC’s are exactly what they say! !READ ONLY! (As far as Active directory goes)! Installing WSUS on a RODC will fail off the bat. It will report that access is denied when trying to create certain security groups. You’ll have to manually create these two groups in Active Directory on your primary SBS server to get it to work:

  • SQLServer2005MSFTEUser$RODCSERVERNAME$Microsoft##SSEE
  • SQLServer2005MSSQLUser$RODCSERVERNAME$Microsoft##SSEE

Replace RODCSERVERNAME with the computer name of your RODC Server. You’ll actually notice that two similiar groups already exist (with the server name different) for the existing Windows SBS WSUS install, this existing groups are for the main WSUS server. After creating these groups, this will allow it to install. After this is complete, follow through the WSUS configuration wizard to configure it as a replica for your primary SBS WSUS server.

2. One BIG thing to keep in mind is that with RODC’s you need to configure what accounts (both user and computer) are allowed to be “cached”. Cached credentials allow the RODC to authenticate computers and users in the event the primary domain controller is down. If you do not configure this, if the internet goes down, or the primary domain controller isn’t available, no one will be able to log in to their computers or access network resources at the branch site. When you promoted the server to a RODC, two groups were created in Active Directory: Allow RODC Cached Logins, and Deny RODC Cached Logins (I could be wrong on the exact name since I’m going off memory). You can’t just select and add users to these groups, you need to also select and add the computers they use as well since computers have their own “computer account” in Active Directory.

To overcome this, create two security groups under their respective existing groups. One group will be for users of the branch office, the other group will be for computers of the branch office. Make sure to add applicable users and groups as members of the security groups. Now go to the “Allow RODC Cached Logins” group created by the dc promotion, and add those two new security groups to that group. This will allow remote users and remote computers to authenticate using cached security credentials. PLEASE NOTE: DO NOT CACHE YOUR ADMINISTRATIVE ACCOUNT!!! Instead, create a separate administrative account for that remote office and cache that.

3. One of the sweet things about SBS is all the pre-configured Group policy objects that enable the automatic configuration of the WSUS server, folder redirection, and a bunch of other great stuff. You have to keep in mind that off of the above config, if left alone up to this point, the computers in the branch office will use the folder redirection settings and WSUS settings from the main office. Remote users folder redirection (whatever you have selected, in my case My Documents and Desktop redirection) locations will be stored on the main HQ server. If you’re alright with this and not concerned about the size of the user folders, you can leave this. What I needed to do (for reasons of simple disaster recovery purposes) is have the folder re-directions for the branch office users store the redirection on their own local branch server. Also, we need to have the computers connect to the local branch WSUS server as well (we don’t want each computer pulling updates over the VPN connection as this will use up tons of bandwidth). What’s really neat is when users open applications via RemoteApp (over RDS), if they export files to their desktop inside of RemoteApp, it’ll actually be immediately available on their computer desktop since the RDS server is using these GPOs.

To do this, we’ll need to duplicate and modify a couple of the default GPOs, and also create some OU (Organizational Unit) containers inside of Active Directory so we can apply the new GPOs to them.

First, under “SBSComputers” create an OU called “Branch01Comps” (or call it whatever you want). Then under “SBSUsers” create an OU called “Branch01Users”. Now keep in mind you want to have this fully configured before any users log on for the first time. All of this configuration should be done AFTER the computer is joined (using the SBS connect) to the domain and AFTER the users are configured, but BEFORE the user logs in for the first time. Move the branch office computer accounts to the new Branch office computers OU, and move the Branch office user accounts to the Branch office users OU.

Now open up the Group policy Management Management Console. You want to duplicate 2 GPOs: Update Services Common Settings Policy (rename the duplicate to “Branch Update Services Common Settings Policy” or something), and Small Business Server Folder Redirection Policy (rename the duplicate to “Branch Folder Redirection” or something).

Link the new duplicated Update Services policy to the Branch Computers OU we just created, and link the new duplicated folder redirection to the new users policy we just created.

Modify the duplicated server update policy to reflect the address of the new branch WSUS replica server. Computers at the branch office will now pull updates from that server.

As for Folder redirection, it’s a bit tricky. You’ll need to create a share (with full share access to all users), and then set special file permissions on the folder that you shared (info available at http://technet.microsoft.com/en-us/library/cc736916%28v=ws.10%29.aspx). On top of that, you’ll need to find a way to actually create the child users folders under that share/folder in which you created. I did this by going in to active directory, opening each remote user, and setting their profile variable to the file share. When I hit apply this would create a folder with their username with the applicable permissions under that share, after this was done, I would undo that variable setting and the directory created would stay. Repeat this for each remote user at that specific branch office. You’ll also need to do this each time you add a new user if they bring on more staff, you’ll also need to add all new computers and new users to the appropriate OUs, and security groups we’ve created above.

FINALLY you can now go in to the GPO you duplicated for Branch Folder redirection. Modify the GPO to reflect the new storage path for the redirection objects you want (just a matter of changing the server name).

4. Configure Active Directory Sites and Services. You’ll need to go in to Active Directory Sites and Services and configure sites for each subnet you have (you main HQ subnet, branch 1 subent, and branch 2 subnet), and set the applicable domain controller to those sites. In my case, I created 3 sites, and configured the HQ subnet and second branch to authenticate off the main SBS PDC, and configured the first branch (with their own RODC) to authenticate off their own RODC. Essentially, this tells the computers which domain controller they should be authenticating against.

And you’re done!

A few things to remember, whenever adding new users and/or computers to the branch, ALWAYS join using SBS wizard, add computer to the branch OU, add user to the branch OU, create the users master redirection folder using the profile var in the AD user object, and separately add both user and computer accounts as members of the security group we created to cache credentials.

And remember, always always always test your configuration before throwing it out in to production. In my case, I got it running first try without any problems, but I let it run as a test environment for over a month before deploying to production!

We’ve had this environment running for months now and it’s working great. What’s even cooler is how well the Astaro Security Gateway (Sophos UTM) is handling the multiple WAN connections during failures, it’s super slick!

Nov 282011
 

Just thought I’d do up a quick little post about an issue I’ve been having for some time, and just got it all fixed.

I’ve been running Astaro Security Gateway inside of a VMware environment for a few years. When version 8.x came out, I went ahead and simply attached the ISO to the VM and re-installed over the old v7 and restored the config. This worked great, and for the longest time I had no real issues.

I noticed from time to time that with packet sniffs, there was quite a few retransmissions and TCP segments lost. This didn’t really pose any issues, and didn’t cause any problems, however it was odd.

Recently, I had to configure a Site to Site IPsec VPN between my office, and one of my employees to provide exchange, VoIP, etc… With astaro this is fairly easy, few clicks and it should work simple, however I started noticing huge issues with file transfers, whether being transferred over SMB (Windows File Sharing), or SCP/SSH. Transfers would either completely halt when started, transfer a few couple hundred kilobytes, or transfer half of the file until it would simply halt and become unresponsive.

After 3-4 days of troubleshooting, I went ahead and did a packet sniff, noticed there were numerous TCP segments lost, fragmentation, etc… Initially I beleive that maybe MTU configuration may have had something to do with it, however TCP/IP and the Astaro device should have taken care of properly setting the MTU on the IPsec automatically.

After trying fresh installs of ASG, etc… and no behaviour change, I finally decided to take a few days away and give it a shot later. I’ve troubleshot this from every avenue and for some reason the issue is still existing. I finally figured that the only thing I haven’t checked was with my VMware vSphere environment. Checked the settings, all was good, however I did notice that the NICs for the ASG vm (which were created by the v7 appliance) were set as flexible, and inside of the VM were detected as some type of AMD network adapter. I found this odd.

After shutting down the ASG VM, removing the NICs and configuring new ones using E1000, all of a sudden the issue was fixed, the IPsec Site to Site VPN functioned properly, and all the network issues seen in network captures were resolved.

I hope this helps some other people who may be frustrated dealing with the same issue.

Aug 192011
 

Recently I upgraded a bunch of ASG’s to version 8.2. While most of the upgrades went smoothly, I did have an issue with a specific box at one of my clients offices.

We had some reports that incomming e-mails were being rejected. After checking the Mail Manager, these e-mails were being rejected due to numerous RDNS failures. While most of the incomming message sources actually didn’t have a properly configured RDNS, I finally noticed in one case that a specific sender actually did have properly configured Reverse DNS…

Googling this specific issue came up with nothing, however I noticed in the DNS proxy on the ASG box, that since the upgrade numerous errors were going through on a daily basis:

mail named: Last message ‘unexpected RCODE (RE’ repeated 2 times, supressed by syslog-ng on host.name

mail named[5466]: lame server resolving ‘X’

These errors were filling the log. I went ahead and logged into WebAdmin and removed the DNS forwarders, hit apply, flushed DNS cache, then re-inserted the DNS forwarders. This resolved the issue.