After installing the VMware Horizon Agent on a Physical PC, you may have noticed some issues with USB redirection, audio, and hardware redirection. These issues include not working, or not working in it’s entirety.
On a few occasions I’ve had readers reach out to inform me that they are experiencing these issues. Most recently a reader by the name of “Sascha” reached out and reported issues with audio, particularly the microphone not functioning or being redirected from the VMware Horizon View Client to the Physical PC.
The Fix
In Sascha’s case (along with the other readers), we troubleshot the issue and realized that in each and every case the problem was due to the use of a Windows 10 Profesional license being used. As per the VMware Horizon release notes, a Windows 10 Enterprise license must be used when installing the Horizon Agent on a Physical PC.
Once Sascha and the other users upgrades or installed a Windows 10 Enterprise license, the issues stopped immediately.
This is another reminder that you need an Windows 10 Enterprise license when installing the Horizon Agent on a Physical PC.
Lately, I’ve been playing with video editing and encoding as a new hobby. It requires a powerful system for the production process for both editing, and encoding. While CPU power isn’t necessarily important, the CPU instruction sets and your GPU play a key part with editing and encoding.
For the last few weeks, I’ve been attempting to use my desktop rig with a couple of Nvidia GeForce cards and I’ve been struggling to be able to edit in real time, as well as encode completed video productions in a reasonable amount of time.
As part of my demo and homelab, I have an HPE ML310e Gen8 v2, with an Nvidia Grid K1 card. This setup is backed with an HPE MSA 2040 SAN for main storage and a Synology DS1813+ for backup and video storage.
It’s a beautiful desktop replacement as it’s silent, provides a desktop backed with a Intel Xeon Processor, and a high performance GPU.
VDI Video Editing and Encoding
For software, I’ve been using Cyberlink’s PowerDirector software. I’ve used this in the past for screen recording, as well as editing videos I use for demos.
On my physical desktop rig, even with two GPUs it struggles to allow me to preview in realtime the edits I’ve done on a project. The preview window is jolty with loss frames, and it’s hard to know what you’re doing. Also, when producing and encoding a finalized video project, it would take forever to complete even a small 5 minute video at 1080p.
When I first loaded this up on my VDI environment, the software instantly detected the Nvidia GRID card, and asked me if it could use it. From that point on the preview window was fluid, transitions and add-ins were rendered on the fly during previewing, and the final production encoding was literally over 20 times faster using 1080p. Keep in mind this VM only has one Nvidia K180q profile attached to it, so I’m only using less than 25% of the cards full capability.
Other benefits to video editing and encoding on VDI
There’s some other benefits that can be realized when doing video editing and encoding inside of a VDI environment:
Ability to connect remotely and work anywhere
Ability to work anywhere with a high performance system
High speed video storage on demand (since it’s all remote)
It can become part of your normal backup solution
This is just another great use case scenario for VDI. Whether it’s for the video professional, or a large organization.
Since I’ve installed and configured my Nvidia GRID K1, I’ve been wanting to do a graphics quality demo video. I finally had some time to put a demo together.
I wanted to highlight what type of graphics can be achieved in a VDI environment. Even using an old Nvidia GRID K1 card, we can still achieve amazing graphical performance in a virtual desktop environment.
This demo outlines 3D accelerated graphics provided by vGPU.
Demo Video
Please see below for the video:
Information
Demo Specifications
VMware Horizon View 7.8
NVidia GRID K1
GRID vGPU Profile: GRID K180q
HPE ML310e Gen8 V2
ESXi 6.5 U2
Virtual Desktop: Windows 10 Enterprise
Game: Steam – Counter-Strike Global Offensive (CS:GO)
Please Note
Resolution of the Virtual Desktop is set to 1024×768
Blast Extreme is the protocol used
Graphics on game are set to max
Motion is smooth in person, screen recorder caused some jitter
This video was then edited on that VM using CyberLink PowerDirector
VMware Horizon is great at providing an end user computing solution for your business, a byproduct of which is an amazing remote access system. With any type of access, especially remote, comes numerous security challenges. DUO Security’s MFA solution is great at provided multi-factor authentication for your environment, and fully supports VMware Horizon View.
In this guide, I’ll be providing a quick how to guide on how to get setup and configured with DUO MFA on your Horizon Server to authenticate View clients.
If you are looking to only implement DUO 2FA on the VMware Unified Access Gateway (and not the connection server), head over to my colleague’s post here: https://securedpackets.com/?p=424
Here’s a video of DUO on VMware Horizon View in action! Scroll down for instructions on how to set it up!
Enabling DUO MFA on VMWare View will require further authentication from your users via one of the following means:
DUO Push (Push auth request to mobile app)
Phone call (On user’s pre-configured phone number)
SMS Passcode (Texted to users pre-configured phone number)
VMware Horizon View Connection Server (Configured and working)
VMware View Client (for testing)
DUO Authentication Proxy installed, configured, and running (integrated with Active Directory)
Completed DUO Auth Proxy config along with “[ad_client]” as primary authentication.
Please Note: For this guide, we’re going to assume that you already have a Duo Authentication Proxy installed and fully configured on your network. The authentication proxy server acts as a RADIUS server that your VMware Horizon View Connection Server will use to authenticate users against.
Instructions
The instructions will be performed in multiple steps. This includes adding the application to your DUO account, configuring the DUO Authentication Proxy, and finally configuring the VMware View Connection Server.
Add the application to your DUO account
Log on to your DUO account, on the left pane, select “Applications”.
Click on the Blue button “Protect an Application”.
Using the search, look for “VMware View”, and then select “Protect this Application”.
Record the 3 fields labelled “Integration key”, “Security key”, and “API hostname”. You’ll need these later on your authentication proxy.
Feel free to modify the Global Policy to the settings you require. You can always change and modify these later.
Under Settings, we’ll give it a friendly name, choose “Simple” for “Username normalization”, and optionally configure the “Permitted Groups”. Select “Save”.
Configure the DUO Authentication Proxy
Log on to the server that is running your DUO Authentication Proxy.
Open the file explorer and navigate to the following directory.
Before any changes I always make a backup of the existing config file. Copy and paste the “authproxy.cfg” file and rename the copy to “authproxy.cfg.bak”.
Using the values from the “Protect an Application”, replace the “ikey” with your “integration key”, “skey” with your “secret key”, and “api_host” with the API hostname that was provided. Additionally “radius_ip_1” should be set to your View Connection Server IP, and “radius_secret_1” is a secret passphrase shared only by DUO and the View connection server.
Save the file.
Restart the DUO Authentication Proxy either using Services (services.msc), or run the following from a command prompt:
net stop DuoAuthProxy & net start DuoAuthProxy
Configure the VMware View Connection Server
Log on to your server that runs your VMware View Connection Server.
Open the VMware Horizon 7 Administrator web interface and log on.
On the left hand side, under “Inventory”, expand “View Configuration” and select “Servers”.
On the right hand side in the “Servers” pane, click on the “Connection Servers” tab, then select your server, and click “Edit”.
On the “Edit Connection Server Settings” window, click on the “Authentication” tab.
Scroll down to the “Advanced Authentication” section, and change the “2-factor authentication” drop down, to “RADIUS”. Check both check boxes for “Enforce 2-factor and Windows user name matching”, and “Use the same user name and password for RADIUS and Windows Authentication”.
Below the check boxes you will see “Authenticator”. Open the drop down, and select “Create New Authenticator”.
In the “Add RADIUS Authenticator” window, give it a friendly name, friendly description, and populate the fields as specified in the screenshot below. You’ll be using the shared RADIUS/DUO secret we created above in the config file for the proxy auth.
Please Note that I changed the default RADIUS port in my config to 1813.
Click “Ok”, then make sure the newly created authenticator is select in the drop down. Proceed to click “Ok” on the remaining windows, and close out of the web interface.
That’s it!
You have now completely implemented DUO MFA on your Horizon deployment. Now when users attempt to log on to your VMware View Connection server, after entering their credentials they will be prompted for a second factor of authentication as pictured below.
You have VMware Horizon View deployed along with Duo Multi-Factor Authentication (2FA, MFA), and you’re you having user experience issues with 10ZiG Zero Clients and multiple login dialog boxes and planning on how to deal with the MFA logins.
I spent some time experimenting with numerous different settings trying to find the cleanest workaround that wouldn’t bother the user or mess up the user experience. I’m going to share with you what I came up with below.
If you’re interesting in 10ZiG products and looking to buy, don’t hesitate to reach out to me for information and/or a quote! We can configure and sell 10ZiG Zero Clients (and thin clients), help with solution design and deployment, and provide consulting services! We sell and ship to Canada and the USA!
The Issue
When you have DUO MFA deployed on VMware Horizon, you may experience login issues when using a 10ZiG Zero Client to access the View Connection Server. This is because the authentication string (username, password, and domain) aren’t passed along correctly from the 10ZiG Login Dialog Box to the VMware Horizon View Client application.
Additionally, when DUO is enabled on VMware View (as a RADIUS authentication), there is no domain passed along inside of the DUO login prompt on the view client.
This issue is due to limitations in the VMware Horizon View Linux Client. This issue will and can occur on any system, thin-client, or Zero Client that uses a command string to initialize a VMware View session where DUO is configured on the View Connection Server.
Kevin Greenway, the CTO at 10ZiG, reached out to say that they have previously brought this up with VMware as a feature request (to support the required functionality), and are hopeful it gets committed.
At this point in time, we’d like to recommend everyone to reach out to VMware and ask for this functionality as a feature request. Numerous simultaneous requests will help gain attention and hopefully escalate it on VMware’s priority list.
The Workaround
After troubleshooting this, and realizing that the 10ZiG VMware login details are completely ignored and not passed along to the VMware View client, I started playing with different settings to test the best way to provide the best user experience for logging in.
At first I attempted to use the Kiosk mode, but had issues with some settings not being passed from the 10ZiG Client to the View Client.
Ultimately I found the perfect tweaking of settings that created a seamless login experience for users.
The Settings
On the 10ZiG Zero Client, we view the “Login” details of the “VMware Horizon Settings” dialog box.
Login Mode: Default
Username: PRESS LOGIN
Password: 1234
Domain: YourDomain
Please Note: In the above, because DUO MFA is enabled, the “Username”, “Password” and “Domain” values aren’t actually passed along to the VMware View application on the Zero Client.
We then navigate to the “Advanced” tab, and enable the “Connect once” option. This will force a server disconnection (and require re-authentication) on a desktop pool logoff or disconnection.
Please Note: This option is required so that when a user logs off, disconnects, or get’s cut off by the server, the Zero Client fully disconnects from the View Connection Server which causes re-authentication (a new password prompt) to occur.
The Login User Experience
So now that we’ve made the modifications to the Zero Client, I want to outline what the user experience will look like from Boot, to connection, to disconnection, to re-authentication.
Turning on the 10ZiG Zero Client, you are presented with the DUO Login Prompt on the View Connection Server.
You then must pass 2FA/MFA authentication.
You are then presented with the desktop pools available to the user.
Upon logging off, disconnecting, or getting kicked off the server, the session is closed and you are presented to the 10ZiG VDI Login Window.
To re-establish a connection, click “Login” as instruction by the “Username” field.
You are presented with the DUO Login Window.
And the process repeats.
As you can see it’s a simple loop that requires almost no training on the end user side. You must only inform the users to click “Login” where the prompt advises to do so.
Once you configure this, you can add it to a configuration template (or generate a configuration template), and then deploy it to a large number of 10ZiG Zero Clients using 10ZiG Manager.
Let me know if this helps, and/or if you find a better way to handle the DUO integration!
I can’t tell you how excited I am that after many years, I’ve finally gotten my hands on and purchased an Nvidia Quadro K1 GPU. This card will be used in my homelab to learn, and demo Nvidia GRID accelerated graphics on VMware Horizon View. In this post I’ll outline the details, installation, configuration, and thoughts. And of course I’ll have plenty of pictures below!
The focus will be to use this card both with vGPU, as well as 3D accelerated vSGA inside in an HPE server running ESXi 6.5 and VMware Horizon View 7.8.
Please Note: Some, most, or all of what I’m doing is not officially supported by Nvidia, HPE, and/or VMware. I am simply doing this to learn and demo, and there was a real possibility that it may not have worked since I’m not following the vendor HCL (Hardware Compatibility lists). If you attempt to do this, or something similar, you do so at your own risk.
For some time I’ve been trying to source either an Nvidia GRID K1/K2 or an AMD FirePro S7150 to get started with a simple homelab/demo environment. One of the reasons for the time it took was I didn’t want to spend too much on it, especially with the chances it may not even work.
Essentially, I have 3 Servers:
HPE DL360p Gen8 (Dual Proc, 128GB RAM)
HPE DL360p Gen8 (Dual Proc, 128GB RAM)
HPE ML310e Gen8 v2 (Single Proc, 32GB RAM)
For the DL360p servers, while the servers are beefy enough, have enough power (dual redundant power supplies), and resources, unfortunately the PCIe slots are half-height. In order for me to use a dual-height card, I’d need to rig something up to have an eGPU (external GPU) outside of the server.
As for the ML310e, it’s an entry level tower server. While it does support dual-height (dual slot) PCIe cards, it only has a single 350W power supply, misses some fancy server technologies (I’ve had issues with VT-d, etc), and only a single processor. I should be able to install the card, however I’m worried about powering it (it has no 6pin PCIe power connector), and having ESXi be able to use it.
Finally, I was worried about cooling. The GRID K1 and GRID K2 are typically passively cooled and meant to be installed in to rack servers with fans running at jet engine speeds. If I used the DL360p with an external setup, this would cause issues. If I used the ML310e internally, I had significant doubts that cooling would be enough. The ML310e did have the plastic air baffles, but only had one fan for the expansion cards area, and of course not all the air would pass through the GRID K1 card.
The Purchase
Because of a limited budget, and the possibility I may not even be able to get it working, I didn’t want to spend too much. I found an eBay user local in my city who had a couple Grid K1 and Grid K2 cards, as well as a bunch of other cool stuff.
We spoke and he decided to give me a wicked deal on the Grid K1 card. I thought this was a fantastic idea as the power requirements were significantly less (more likely to work on the ML310e) on the K1 card at 130 W max power, versus the K2 card at 225 W max power.
We set a time and a place to meet. Preemptively I ran out to a local supply store to purchase an LP4 power adapter splitter, as well as a LP4 to 6pin PCIe power adapter. There were no available power connectors inside of the ML310e server so this was needed. I still thought the chances of this working were slim…
I also decided to go ahead and download the Nvidia GRID Software Package. This includes the release notes, user guide, ESXi vib driver (includes vSGA, vGPU), as well as guest drivers for vGPU and pass through. The package also includes the GRID vGPU Manager. The driver I used was from: https://www.nvidia.com/Download/driverResults.aspx/144909/en-us
To install, I copied over the vib file “NVIDIA-vGPU-kepler-VMware_ESXi_6.5_Host_Driver_367.130-1OEM.650.0.0.4598673.vib” to a datastore, enabled SSH, and then ran the following command to install:
The command completed successfully and I shut down the host. Now I waited to meet.
We finally met and the transaction went smooth in a parking lot (people were staring at us as I handed him cash, and he handed me a big brick of something folded inside of grey static wrap). The card looked like it was in beautiful shape, and we had a good but brief chat. I’ll definitely be purchasing some more hardware from him.
Hardware Installation
Installing the card in the ML310e was difficult and took some time with care. First I had to remove the plastic air baffle. Then I had issues getting it inside of the case as the back bracket was 1cm too long to be able to put the card in. I had to finesse and slide in on and angle but finally got it installed. The back bracket (front side of case) on the other side slid in to the blue plastic case bracket. This was nice as the ML310e was designed for extremely long PCIe expansion cards and has a bracket on the front side of the case to help support and hold the card up as well.
For power I disconnected the DVD-ROM (who uses those anyways, right?), and connected the LP5 splitter and the LP5 to 6pin power adapter. I finally hooked it up to the card.
I laid the cables out nicely and then re-installed the air baffle. Everything was snug and tight.
Please see below for pictures of the Nvidia GRID K1 installed in the ML310e Gen8 V2.
Host Configuration
Powering on the server was a tense moment for me. A few things could have happened:
Server won’t power on
Server would power on but hang & report health alert
Nvidia GRID card could overheat
Nvidia GRID card could overheat and become damaged
Nvidia GRID card could overheat and catch fire
Server would boot but not recognize the card
Server would boot, recognize the card, but not work
Server would boot, recognize the card, and work
With great suspense, the server powered on as per normal. No errors or health alerts were presented.
I logged in to iLo on the server, and watched the server perform a BIOS POST, and start it’s boot to ESXi. Everything was looking well and normal.
After ESXi booted, and the server came online in vCenter. I went to the server and confirmed the GRID K1 was detected. I went ahead and configured 2 GPUs for vGPU, and 2 GPUs for 3D vSGA.
ESXi Host Graphics Devices Settings
VM Configuration
I restarted the X.org service (required when changing the options above), and proceeded to add a vGPU to a virtual machine I already had configured and was using for VDI. You do this by adding a “Shared PCI Device”, selecting “NVIDIA GRID vGPU”, and I chose to use the highest profile available on the K1 card called “grid_k180q”.
VM Settings to add NVIDIA GRID vGPU
After adding and selecting ok, you should see a warning telling you that must allocate and reserve all resources for the virtual machine, click “ok” and continue.
Power On and Testing
I went ahead and powered on the VM. I used the vSphere VM console to install the Nvidia GRID driver package (included in the driver ZIP file downloaded earlier) on the guest. I then restarted the guest.
After restarting, I logged in via Horizon, and could instantly tell it was working. Next step was to disable the VMware vSGA Display Adapter in the “Device Manager” and restart the host again.
Upon restarting again, to see if I had full 3D acceleration, I opened DirectX diagnostics by clicking on “Start” -> “Run” -> “dxdiag”.
dxdiag on GRID K1 using k180q profile
It worked! Now it was time to check the temperature of the card to make sure nothing was overheating. I enabled SSH on the ESXi host, logged in, and ran the “nvidia-smi” command.
“nvidia-smi” command on ESXi Host
According to this, the different GPUs ranged from 33C to 50C which was PERFECT! Further testing under stress, and I haven’t gotten a core to go above 56. The ML310e still has an option in the BIOS to increase fan speed, which I may test in the future if the temps get higher.
With “nvidia-smi” you can see the 4 GPUs, power usage, temperatures, memory usage, GPU utilization, and processes. This is the main GPU manager for the card. There are some other flags you can use for relevant information.
“nvidia-smi vgpu” for vGPU Information“nvidia-smi vgpu -q” to Query more vGPU Information
Final Thoughts
Overall I’m very impressed, and it’s working great. While I haven’t tested any games, it’s working perfect for videos, music, YouTube, and multi-monitor support on my 10ZiG 5948qv. I’m using 2 displays with both running at 1920×1080 for resolution.
I’m looking forward to doing some tests with this VM while continuing to use vGPU. I will also be doing some testing utilizing 3D Accelerated vSGA.
The two coolest parts of this project are:
3D Acceleration and Hardware h.264 Encoding on VMware Horizon
Getting a GRID K1 working on an HPE ML310e Gen8 v2
Highly recommend getting a setup like this for your own homelab!
Uses and Projects
Well, I’m writing this “Uses and Projects” section after I wrote the original article (it’s now March 8th, 2020). I have to say I couldn’t be impressed more with this setup, using it as my daily driver.
Since I’ve set this up, I’ve used it remotely while on airplanes, working while travelling, even for video editing.
Some of the projects (and posts) I’ve done, can be found here:
One really cool feature that was released in VMware Horizon View 7.7 (and Horizon 8), is the ability to install the Horizon Agent on to a Physical PC or Physical Workstation and use the Blast Extreme protocol. It even supports 3D Acceleration via a GPU and the direct-connect plugin (so you don’t need to have/use a View Connection Server)!
Update July 20, 2022: With the release of Horizon 8 2206, you can now install the Horizon agent on Windows 10 Pro, and Edu editions. Previous versions of Horizon required Windows 10 Enterprise.
As a system admin, I see value in having some Physical PCs managed by the View connection server. Also, if you have the licensing, this will allow you to set this up as a remote access solution for your business and employees.
I’ll be detailing some information about doing this, what’s required, what works, and what doesn’t below…
Physical PCs and workstations with Windows 10 1803 Enterprise or higher can be brokered through Horizon 7 via Blast Extreme protocol.
Requirements
So here’s what’s required to get going:
Windows 10 Enterprise (for Horizon versions before Horizon 8 2206)
Windows 10 Pro or Edu (for Horizon 8 2206 and later)
Physical PC or Workstation
VMware Horizon Licensing
VMware Horizon 7.7 or higher (and Horizon 8) Connection Server
VMware Horizon 7.7 or higher (and Horizon 8) Agent on Physical PC/Workstation
Manual Desktop Pool (Manual is required for Physical PCs to be added)
What Works
Blast Extreme
3D Acceleration (via GPU with drivers)
3D Acceleration with Consumer GPUs
Multiple Displays
Multiple GPUs
VMware View Agent Direct-Connection Plug-In
What Doesn’t Work
GPU Hardware h.264 encoding on consumer GPUs (h.264 encoding is still handled by the CPU)
GPU Hardware h.264/h.265 offload may work in later versions (I still need to test this)
Thoughts
I’ve been really enjoying this feature. Not only have I moved my desktop in to my server room and started remoting in using Blast, but I can think of many use cases for this (machines shops, sharing software licenses, remote access, etc.).
I’ve had numerous discussions with customers of mine who also say they see tremendous value in this after I brought it to their attention. I’ll update this post later on once I hear back about how some of my customers have deployed it.
Update – March 14th 2020 – I’ve been using this on 3 different systems since I wrote this article and love this feature!
3D Acceleration
One thing that is really cool, is the fact that 3D acceleration is enabled and working if the computer has a GPU installed (along with drivers). And no, you don’t need a fancy enterprise GPU. In my setup I’m running a GeForce 550 GTX TI, and a GeForce 640.
Horizon 3D Acceleration Enabled via dxdiag
While 3D acceleration is working, I have to note that the h.264 encoding for the Blast Extreme session is still being handled by the CPU. So while you are getting some great 3D accelerated graphics, depending on your CPU and screen resolution, you may be noticing some choppiness. If you have a higher end CPU, you should be able to get some pretty high resolutions. I’m currently running 2 displays at 1920×1080 on an extremely old Core 2 Quad processor.
H.264 encoding
I spent some time trying to enable the hardware h.264 encoder on the GPUs. Even when using the “NvFBCEnable.exe” (located in C:\Program Files\VMware\VMware Blast\) application to enable hardware encoding, I still notice that the encoding is being done on the CPU. I’m REALLY hoping they change this in future releases.
Hacks?
Another concept that this opens the door for is consumer GPUs providing 3D acceleration without all the driver issues. Technically you could use the CPU settings (to hide the fact the VM is being virtualized), and then install the Horizon Agent as a physical PC (even though it’s being virtualized). This should allow you to use the GPU that you’re passing through, but you still won’t get h.264 encoding on the GPU. This should stop the pesky black screen issue that’s normally seen when using this work around.
Bugs
When upgrading to Horizon View 8 or higher, as part of the process to upgrade the agent on the physical machine, you may notice this functionality stops working. To resolve this, simply uninstall the agent and then re-install it.
Also, on a final note… I did find a bug where if any of the physical PCs are powered down or unavailable on the network, any logins from users entitled to that pool will time out and not work. When this issue occurs, a WoL (Wake on LAN) packet is sent to the desktop during login, and the login will freeze until the physical PC becomes available. This occurs during the login phase, and will happen even if you don’t plan on using that pool. More information can be found here: https://www.stephenwagner.com/2019/03/19/vmware-horizon-view-stuck-authenticating-logging-in/
I noticed after upgrading to VMware Horizon View 7.8 and VMware Unified Access Gateway 3.5, when attempting to log in to a VMware Horizon View Connection Server via the Horizon Client, I would get stuck on “Authenticating”. If using the HTML client, it would get stuck on “Logging in”.
This will either timeout, or eventually (after numerous minutes) finally load. This occurs both with standard authentication, as well as 2FA/MFA/RADIUS authentication.
The Problem
Originally, I thought this issue was related to 2FA and/or RADIUS, however after disabling both, the issue was still present. In the VDM debug logs, you may find something similar to below:
2019-03-19T16:07:44.971-06:00 INFO (1064-181C) UnManagedMachineInformation Wake-on-LAN packet sent to machine comp.domain.com
2019-03-19T16:07:34.296-06:00 INFO (1064-17F0) UnManagedMachineInformation wait ended for startup update, returning false 2019-03-19T16:07:34.296-06:00 INFO (1064-17F0) UnManagedMachineInformation Could not wake up PM comp.domain.com within timeout
The Fix
The apparent delay “Authenticating” or “Logging In” is caused by a Wake On LAN packet being sent to an unmanaged physical workstation that has the VMware View Agent installed. This is occurring because the system is powered off.
After powering on all unmanaged View agents running on physical computers, the issue should be resolved.
One of the coolest things I love about running VMware Horizon View and VDI is that you can repurpose old computers, laptops, or even netbooks in to perfect VDI clients running Linux! This is extremely easy to do and gives life to old hardware you may have lying around (and we all know there’s nothing wrong with that).
I generally use Fedora and the VMware Horizon View Linux client to accomplish this. See below to see how I do it!
Quick Guide
Download the Fedora Workstation install or netboot ISO from here.
Burn it to a DVD/CD if you have DVD/CD drive, or you can write it to a USB stick using this method here.
Install Fedora on to your laptop/notebook/netbook using the workstation install.
Update your Fedora Linux install using the following command
dnf -y upgrade
Install the prerequisites for the VMware Horizon View Linux client using these commands
To run the client, you can find it in the GUI applications list as “VMware Horizon Client”, or you can launch it by running “vmware-view”.
VMware Horizon View on Linux in action
Here is a VMware Horizon View Linux client running on HP Mini 220 Netbook
Additional Notes:
-If you’re comfortable, instead of the workstation install, you can install the Fedora LXQt Desktop spin, which is a lightweight desktop environment perfect for low performance hardware or netbooks. More information and the download link for Fedora LXQt Desktop Spin can be found here: https://spins.fedoraproject.org/en/lxqt/
-If you installed Fedora Workstation and would like to install the LXQt window manager afterwards, you can do so by running the following command (after installing, at login prompt, click on the gear to change window managers):
dnf install @lxqt-desktop-environment
-Some of the prerequisites above in the guide may not be required, however I have installed them anyways for compatibility.
Well, after using the VMware Horizon Client mobile app (for Android) for a year, I finally decided to do a little write up and review. I use the android client regularly on my Samsung Tab E LTE tablet, and somewhat infrequently on my Samsung Galaxy S9+ mobile phone (due to the smaller screen).
Let’s start off by briefly explaining what VMware Horizon View is, what the client does, and finally the review. I’ll be including a couple screenshots as well to give an idea as to how the interface and resolution looks on the tablet itself.
VMware Hoirzon View is a product and solution that enables VDI technology for a business. VDI stands for Virtual Desktop Infrastructure. When a business uses VDI, they virtualize their desktops and use either thin clients, zero clients, or the view client to access these virtualized desktops. This allows the business to utilize all the awesome technologies that virtualization brings (DRS, High Availability, Backup/DR, high performance, reduced hardware costs) and provide rich computing environments to their users. The technology is also particularly interesting in the fact that it provides amazing remote access capabilities as one can access their desktop very easily with the VMware View Client.
When you tie this on to an advanced security technology such as Duo’s MFA product, you can’t go wrong!
In special case or large environments, enormous cost savings can be realized when implementing VDI.
What is the VMware Horizon View Mobile client for Android
As mentioned above, to access one’s virtualized desktop a client is needed. While a thin client or zero client can be used, this is beyond the scope of this post as here we are only discussing the VMware View client for Android.
You can download the VMware View client for Android from the App store (link here).
The VMware Horizon View Mobile client for Android allows you to connect to your VDI desktop remotely using your Android based phone or tablet. Below is a screenshot I took with my Samsung Tab E LTE tablet (with the side bar expanded):
VMware Horizon View Client on Android Tablet
VMware Horizon View Mobile Client for Android Experience
Please Note: There is more of the review below the screenshots. Scroll down for more!
The app appears to be very lightweight, with an easy interface. Configuration of View Connections Servers, or UAG’s (Unified Access Gateways) is very simple. The login process performs with RADIUS and/or MFA as the desktop client would. In the examples below, you’ll notice I use Duo’s MFA/2FA authentication solution in combination with AD logins.
VMware Horizon View Mobile Client Android Server List
The interface is almost identical to the desktop client with very little differences. The configuration options are also very similar and allow customization of the app, with options for connection quality as an example.
VMware Horizon View Mobile Client Android Server Login
VMware Horizon View Mobile Client Android Login Duo MFA
As you can see above, the RADIUS and Duo Security Login prompts are fully functional.
VMware Horizon View Mobile Client Android Server List
VMware Horizon View Mobile Client Android Windows 10 VDI Desktop
The resolution is perfect for the tablet, and is very usable. The touch interface works extremely well, and text input works as good as it can. While this wouldn’t be used as a replacement for the desktop client, or a thin/zero client, it is a valuable tool for the mobile power user.
With how lightweight and cheap tablets are now, you could almost leave your tablet in your vehicle (although I wouldn’t recommend it), so that in the event of an emergency where you need to access your desktop, you’d be able to using the app.
Pros:
Fluid interface
Windows 10 touch functionality works great
Resolution Support
Samsung Dex is fully supported
Webcam redirection works
Works on Airplanes using in flight WiFi
Cons:
Bandwidth usage
Saving credentials via Fingerprint Scanner would be nice (on the S8+ and S9+)
My Usage
Being in IT, I’ve had to use this many times to log in and manage my vSphere cluster, servers, HPE iLo, check temperatures, and log in to customer environments (I prefer to log in using my VDI desktop, instead of saving client information on the device I’m carrying with me). It’s perfect for these uses.
I also regularly use VDI over LTE. Using VDI over mobile LTE connections works fantastic, however you’ll want to make sure you have an adequate data plan as the H.264 video stream uses a lot of bandwidth. Using this regularly over LTE could cause you to go over your data limits and incur additional charges.
Additional Information
Samsung Dex
The VMware Horizon View Mobile Client for Android also supports Samsung Dex. This means that if you have a Dex dock or the Dex pad, you can use the mobile client to provide a full desktop experience to a monitor/keyboard/mouse using your Samsung Galaxy phone. I’ll be doing a write up later to demo this (it works great).
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.
Do you accept the use of cookies and accept our privacy policy? AcceptRejectCookie and Privacy Policy
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.